Author Archives: federalist

10/22 Precision Rematch

KIDD 10/22 in Archangel stock, Ruger 10/22 with Feddersen barrel in Vantage stock

These are both Ruger 10/22 style semi-automatic rifles built for shooting .22LR with maximum accuracy. On top is an $860 rifle built entirely by KIDD Innovative Design. The receiver and trigger are milled from aluminum, and the bolt from hardened steel. The single-stage trigger is also a crisply machined assembly that adjusts down to a pull of just 1.5 pounds. The lightweight barrel is guaranteed to group inside of half an inch at 50 yards. The gun here is screwed into a comfortable $100 ProMag Archangel Target stock

Do you have to spend $1000 to get an accurate .22 rifle? Expert barrel maker Fred Feddersen says one of his $170 barrels will turn an off-the-rack Ruger into a gun that can compete with any custom autoloader. So the second gun shown is a standard Ruger 10/22 receiver and bolt onto which I swapped Feddersen’s barrel. Of course I don’t think I can really shoot that well with a standard trigger, so to be fair I bought another $200 KIDD trigger assembly for it. The gun is shown here screwed into a beautiful $175 Tactical Solutions Vantage laminated stock.

I tested these for precision last year. This time, with a few more ammo types, I also tested all ammo both with and without a suppressor.


Both guns were cleaned and then shot through the following sequence of 40gr subsonic target loads:

  1. 30 rounds SK Plus
  2. 25 rounds SK Match
  3. 15 rounds Eley Match
  4. 40 rounds CCI SV
  5. 40 rounds Aguila SuperExtra

All rounds were fed from the same transparent Ruger 10-round box magazine. This time the KIDD ran with no hiccups whatsoever. The Feddersen-barreled Ruger, shot second, had one failure to feed with the CCI and one with the Aguila.

The raw data and calculations can be downloaded here. The targets are shown at the end of this post. Summary analysis:

Precision of KIDD vs Feddersen rifles on different ammunition
Continue reading

XCR Short-barrel Precision

XCR equipped with a precision stainless 11

A precision-obsessed friend was lamenting the apparent inability of his Robinson XCR to shoot tight groups. Although it was not designed specifically for precision, I am a fan of the gun’s design. Particularly given its ease of changing barrels, I began to wonder how much we could improve on the standard chrome-lined light-contour barrels. So I sent two Lothar-Walther match-grade 1:8 rifled stainless steel blanks to Robinson and waited (seven months) for them to return as heavy-contour 11″ 5.56mm XCR barrels.

This is not a gun that is easy to shoot precisely: It is light, and its single-stage trigger breaks at over 4 pounds, which I know robs me of accuracy. In order to remove shooter dispersion from the equation I tested various configurations in a custom machine rest. I ran a range of ammunition through two standard 11″ barrels and, sure enough, 10-round groups would typically exhibit a mean radius in the vicinity of 1.5MOA. The standard 16″ light barrel, interestingly, printed 10-round groups with MR just above 1.0MOA shooting light bullets (both XM-193 and Wolf Classic!), but didn’t do as well with heavier bullets in match-grade loads (despite its 1:9 twist).

With the new precision barrels the rifle prints 10-round groups with mean radius consistently below 1.0MOA, like these:

XCR Precision 11

Note that from the short barrel 75gr .223 loads run about 2260fps. On the high end, 55gr 5.56mm clocked 2775fps.

There is some vertical stringing evident, which varies with the upper, and which suggests there is further room to tighten the design. And, as mentioned above, these groups were achieved with a machine rest. When I shoot off of bags 10-round groups open up by roughly another 0.5MOA. Suffice it to say that with a good barrel and shooter this gun is capable of respectable accuracy.


I recently supplemented my 6-year-old Sony Alpha-300 DSLR camera body with a mid-grade Sony A-77II SLT: a clever body that uses a fixed semi-reflective mirror instead of the moving mirror that dominated the field until the recent advent of mirrorless digital cameras. Though still stuck with the APS-C format this was an upgrade to a much more sensitive and higher resolution 24Mpx sensor (from the 300’s 10Mpx sensor). The other salient features are vastly improved auto-focus, imperceptible shutter lag, and a machine-gun fast 12fps continuous shooting rate.

The other upgrade I just made was to my lighting kit. Until now I have relied on natural light, reflectors, and a lone Sony 43GN speedlight. For this shoot I added two $60 Neewer TT 660 flashes, which despite their low price are fully featured for manual lighting and sport a Guide Number of 58. I also bought a cheap radio trigger system that is able to sync all three flashes up to 1/200s. The Neewers take two seconds for a full recharge from batteries, but dialing them back to 1/16 power they can keep up with full-speed shooting bursts.

For this shoot I relied almost entirely on the light from these three flashes on a 10′ x 6′ stage. At 1/4 power I could shoot 100 ISO f/6 at 1/200s. For the action sequences I had to reduce the flash power to keep up with the shooting rate, but that revealed another strength of the speedlights: lower power means faster discharge rates, so even leaving my shutter about 1/200s the effective exposure was in the neighborhood of a motion-freezing 1/1000s.
Continue reading

Products I’m Looking For: 2015 Edition

Here’s my annual gift to entrepreneurs: If you want to make money, bring any one of these items to market and I guarantee you success!

More heavy subsonic .22LR ammunition. The market above 40gr is still limited to the Aguila 60gr load!

Gapless revolvers. The Nagant 1895 Revolver goes into battery when cocked to seal the cylinder gap. Revolver manufacturers pride themselves on their lockwork but the biggest innovation in revolvers in the 120 years since the Nagant went into service has probably been the shift of the barrel to the bottom of the cylinder with the Chiappa Rhino line. How about a revolver that is normally in battery and only cams out of battery to open or rotate the cylinder? Eliminating that loud, dangerous gap would be very cool, and doing it with a nice trigger pull would be a worthy achievement for a revolver engineer.

3-mode single/autoloaders. Historically automatic rifles have had a three-mode selector that toggles between Safe, Semi-automatic (one shot per trigger pull), and Automatic (typically either a 3-round burst or continuous fire while the trigger is depressed). For the civilian market that third mode has been eliminated. But there is another mode that would not be restricted that I would appreciate having in its place: Call it Manual, which would fire a loaded round but not cycle the action. The biggest benefit would be found shooting suppressed, where the option of keeping the action locked up would result in quieter shots and less fouling. The Manual mode would also be a useful tool for training. Granted, it is possible to run some piston guns in manual mode: the Ruger SR-556 and the XCR have gas selectors that can close the gas system completely. But they aren’t designed to be easily toggled the way fire control switches are.

Faster, cheaper, higher-resolution video cameras. As of now there is a gap between the $5500 Edgertronic, which can shoot 720p at 700fps and lower resolutions up to 18kfps, and (of all things) the $900 iPhone 6 which maxes out at 240fps in 720p. No camera in the consumer price range offers sustained video above 240fps!

Barrett REC7 Precision

Barrett REC7 with NF-F1 and LAR

We’ve been questioning what sort of precision we can expect from a piston-driven rifle with a chrome-lined bore. Those are both features believed to reduce accuracy (vs direct-impingement and an unchromed bore). We tested our Ruger SR-556 shooting ten-round groups using the same suite of ammo as in our Savage .223 Precision test and got CEP across the board about 1 MOA (with the exception of the bottom-of-the-barrel Wolf Classic, which produced CEP of 1.5 MOA).

This weekend we got a chance to try a little harder with a Barrett REC7, a premium rifle. Shown above, we fitted it for this test with an LRA bipod and NightForce F1 scope. Five shooters took 10 shots each with two different types of ammo. Given the conditions the shooter variation was minimal. The ammo makes the difference, and this gun sets a new precision benchmark for its type:

Load CEP (MOA) 90% Confidence
Federal Gold Medal Match 77gr 0.50 (0.45, 0.57)
American Eagle XM193 0.96 (0.86, 1.13)

Flash Rounds: Tracers Fired Backwards

Tracers loaded forwards and backwardsA traditional tracer bullet like the M62 carries an incendiary payload in its base. We’ve done a lot of experimenting with bullets fired “backwards” (i.e., base first), and found them to be both accurate and effective, even if their blunt shape produces excessive long-range drag.

TracerExplosionSo what happens when you fire a tracer base first? First of all, the tracer doesn’t ignite in flight. But if it hits something hard, like a rock or steel target, the jacket ruptures and the impact energy usually ignites the tracer compound all at once, producing a satisfying flash and puff of smoke, leading us to call them “flash rounds” or “smoke rounds.”

Once again our friends at Aimed Research provided a high-speed video of a flash round hitting a metal target:

Granted, these are nothing like a “true” incendiary round, which sounds like a cherry bomb exploding. Following is a video of a real incendiary bullet hitting the same metal target. It has a larger payload of fuel (magnesium and/or aluminum) and oxidizer (barium nitrate).

Savage .223 Precision

Savage 10FP in .223 Remington with Nikon Buckmaster 4.5-14x40 scope

Continuing precision testing my guns I took my old Savage 10FP to the range with boxes of six different commercially-available .223 Remington rounds. The rifle has a 24-inch 1:9 heavy barrel installed in a Choate Ultimate Varmint Stock, which makes it a superb bench gun. I mounted the 14x Nikon scope before I had found good Quick-Detach mounts, and before I had concluded 20x is my preferred minimum for precision shooting. But it’s still fine for setting a baseline with commercial ammo:

Load Avg Muzzle
CEP (MOA) 90% Confidence
Black Hills 75gr Match 2620fps 0.23 (0.19, 0.36)
Georgia Arms 69gr Match 2705fps 0.30 (0.24, 0.46)
Wolf Gold 75gr Match 2600fps 0.59 (0.49, 0.87)
American Eagle 55gr 3170fps 0.63 (0.53, 0.93)
Silver Bear 62gr 3000fps 0.80 (0.67, 1.17)
Wolf Classic 55gr 3120fps 0.84 (0.71, 1.25)

The 100-yard target can be reviewed here.

Shooting Bullets Into Water – Part III: Underwater Ballistics

In Part I we noted that water provides a good model of a bullet’s terminal ballistics. We discovered that while slow rifle bullets don’t deform in water they do destabilize and virtually stop after a few feet. At higher speeds they mushroom and/or disintegrate, again causing them to stop within a few feet.

In Part II we discovered that conventional bullets will ricochet back out of the water when fired at shallow angles, but that bullets fired base first are uncannily stable. There has been long-standing military interest in producing bullets that can be fired into or under water and retain accuracy and energy over any significant distance. Supposedly very long tungsten-core bullets (with extreme sectional densities) can “swim” up to 40 feet, but those are experimental projectiles that require special guns.

Curious to see what sort of distance and accuracy could be obtained by the common rifleman we did a series of studies with 225gr Hornady OTM .30″ bullets. First we checked the effect of velocity. Fired base-first these bullets begin to deform about 2000fps on impact with the water. They disintegrate above 2200fps.

About half the time there is a second significant cavity that forms 4-8 feet from water entry, and most of the time when it does form the bullet diverts as much as 45 degrees from its original trajectory. An example is in the following still:

The most consistent effect of the higher velocity bullets was to increase the size and redirection of the second cavity. Bullets fired at 1000fps traveled about 14 feet, while the 2000fps bullets “swam” about 20 feet before essentially stopping and sinking to the bottom. The distinction is that the slower bullets pretty much followed a straight line and didn’t suffer significant deflection or secondary cavitation.

The bullets give up about half their speed within the first 5 feet of water, but are they good enough for fishing? We set up an underwater target 7 feet from the point of entry into the water and fired at an angle of 7 degrees to the water’s surface from a distance of 25 feet. A string of 5 subsonic shots printed a group on the target with an extreme spread of 7″. I’m not a fisher, but in comparison to traditional rifle bullets, which aren’t effective beyond 3 feet, these base-first bullets are remarkably effective in terms of both underwater precision and swim distance.

Shooting Bullets Into Water – Part II: Ricochet

In Part I we noted that water provides a good model of a bullet’s terminal ballistics. We have also spent some time with our water facility and the high-speed imaging technicians from Aimed Research studying the dynamics of ricochet.

Following extensive experiments we have observed that pointed and round-nosed bullets will almost certainly ricochet out of the water when fired at incident angles flatter than 10 degrees. Even superstabilized bullets leave contact with the water tumbling erratically, and give up as much as 90% of their energy to the impact.

Aimed Research provides high-speed video of the behavior. This is a 225gr .30 caliber bullet:

Continue reading